Spécification
TÉLÉCHARGER LES SPÉCIFICATIONS| Taille de filetage | 1.125-16 UNF 2B |
| Gasket Inside Diameter | 3.56 inch / 90.55 mm |
| Le plus grand OD | 4.24 inch / 107.67 mm |
| Hydrostatic Burst Minimum | 203.00 psi / 1400.00 kPa |
| Primary Particle Efficiency | 24.60 micron (c) @ 68% |
| Gasket OD | 3.94 inch / 99.95 mm |
| Longueur | 6.60 inch / 167.64 mm |
| Pressure Valve | No |
| Rated Flow | 10.57 gpm / 40.00 L/min |
| Applicable Region | North America, Europe, South America, South East Asia, South Pacific, Mexico and Central America |
VOIR TOUS LES RÉSULTATS DE RECHERCHE D'ÉQUIPEMENT
| Équipement | Moteur | Année | Qté Req. |
|---|---|---|---|
| 1 | |||
| 1 | |||
| 1 | |||
| TAMD74L-A | 2000 | 2 | |
| TAMD74C-A | 2000 | 2 | |
| TAMD74P-A | 2000 | 2 | |
| TAMD75P-A | 2000 | 2 | |
| TAMD103A-A AUX | 2000 | 2 | |
| TAMD74A | 2000 | 2 | |
| TAMD103A-A | 2000 | 2 | |
| TAMD74A-B | 2000 | 2 | |
| TAMD74L-B | 2000 | 2 | |
| TAMD74P-B | 2000 | 2 | |
| TAMD74A-A | 2000 | 2 | |
| TAMD74C-B | 2000 | 2 | |
| TAMD73WJ-A | 1997 | 1 | |
| TAMD73P-A | 1997 | 1 | |
| TAMD122P-B | 1996 | 2 | |
| TAMD72P-A | 1995 | 1 | |
| TAMD122P-A | 1995 | 2 | |
| TAMD72WJ-A | 1995 | 1 | |
| TAMD122D | 1989 | 2 | |
| TAMD71A | 1986 | 1 | |
| TAMD72A | 1986 | 1 | |
| TAMD61 | 1 | ||
| TMD122 | 1 | ||
| TMD71 | 1 | ||
| TMD121 | 1 | ||
| TMD102 | 1 | ||
| TMD61 | 1 | ||
| 1 | |||
| TAMD74 | 1 | ||
| 1 | |||
| TAMD122P | 1 | ||
| TAMD75 | 1 | ||
| TAMD71 | 1 | ||
| TAMD122P-C | 2 | ||
| TMD100 | 1 |
